To reserve, simply click on the Pre-Order button then to use the code on next page.
Note: A 10% Deposit is required to reserve wheels and outstanding payment will be collected when wheels have arrived with us. Deposit is refundable.
Wheels for Purpose
The Scribe Alloy Gravels were designed for challenging, mixed road conditions. Whether you're a complete off-road gravel rider, or simply like to hop-on/hop-off road/trail, you will have confidence these wheels will deliver.
The Wide 19mm internal profile gives you the option to fit wide tyres for increased stability when cornering, and increased speed due to improved rolling resistance - especially when ran as tubeless. With Centre lock disc as standard, you can ride with confidence knowing the stopping power is there when it's needed.
Tech Spec (summary)
|Material||Hardened, Super-Lightweight Alloy|
|Type||Clincher Tubeless Ready|
|Rim Width (external)||24mm|
|Rim Width (internal)||19mm|
|Spoke Pattern/Hole Count||Front (2x) 28H, Rear (2x) 28H|
- Hardened, heat treated rim design - light in weight but super tough
- Asymmetric design for more even spoke tensions
- 28 hole Front | 28 hole Rear
- Tubeless ready design gives you the option to have increased puncture resistance, faster-rolling wheels and improved weight (works with standard tube also)
- 4-D precision drilled spoke holes - directs spokes exactly to hub anchor point
- Ramped rim bed for easy tyre fitment
- Bead lock design for secure tyre binding, even at lower pressures
- Unique Ratchet Drive system Exclusive to Scribe
- Single Ratchet disc, and leaf spring offers incredible durability as there's only one moving part
- Heat treated stainless steel drive ring
- Centre-lock disc standard (6-bolt adapter available)
- Fully CNC'd rounded design with 4-D precision drilled spoke holes
- Shimano/SRAM 8/9/10/11 speed Anti-bite freehub body fitted - Campagnolo and XDR also available.
- Available in all major standards - Front: QR, Bolt thru (12mm and 15mm); Rear: QR, Bolt thru (142x12)
Bearings are an essential component of wheels and it's important your bearings perform as you want them to. This wheelset comes with sealed, low friction Endurance bearings that are designed to stand the test of time. Ride as much as you want, with confidence your bearings will keep spinning smoothly.
- High quality Taiwanese TPI stainless steel bearings (doesn't rust or corrode)
- Sealed cartridge units with 1x contact seal (outer facing seal interfaces with ball bearings to resist water penetration), and 1x non-contact seal (no interface between ball bearings increases rolling speed)
- Precision engineered to produce incredibly high roundness, with low friction surface
- Aqua grease: repels water and allows your bearing(s) to spin smoothly long term
Spokes and Nipples
- The Scribe Gravels are designed to be tough! For this reason, we have used Sapim's legendary d-Light (double butted) spokes. The short 2mm section at either end of spoke, and 1.65mm for the middle section offers a strong built that will still accelerate quickly. (2.0mm - 1.65mm - 2.0mm)
- Extremely high-fatigue test results means they are extremely durable
- J-bend so you can use any brand as a replacement
- For nipples, we use Brass Sapim double square head nipples. As the Gravels will be exposed to most seasons, brass nipples have significantly improved fatigue resistance when compared with alloy, and they don't corrode, so you can ride them in wet, salty conditions without having to worry about them failing.
Additional items in the box
- Tubeless tape: pre-installed
- Tubeless valves
- Spare spokes
- Spare nipples
- 6-bolt adapter (converts centrelock to 6-bolt)
- Lockring for 15mm axles
- Slim-fit lockring for tight clearing forks
- 10-speed spacer
Weight limit: The upper combined weight limit (bike weight + rider weight + luggage) for these wheels is 120kg. If a rider is in excess of 110kg, we recommend regular wheel checks from an experienced bike mechanic.