POWERED BY TECHNOLOGY | FREE DELIVERY | 30 DAY RETURNS POLICY

Scribe Five4 hub: Ratchet Drive design, High speed, 54-tooth (6.6°)

When we started our hub journey for Scribe, we wanted a design that offered the highest performance possible - fast engagement, light in weight, and with reasonable noise levels. This blog post explains how our Exclusive Scribe Five4 hub addresses these points, and the steps we've taken to bring a high engagement hub to market.

 

The Scribe Five4 uses a Ratchet Drive System (RDS) - How does it work?

Ratchet drive systems have been used in the cycling industry for quite some time and the design we use is exclusive to Scribe. Within the hub shell, we have a 54-tooth Ratchet Plate which is threaded into place. Within the freehub body, there is an opposing ratchet ring (54-teeth also), which is sprung loaded from behind. When force is applied to the pedals, the freehub rotation locks the teeth together to give you drive.

 

Why we use a RDS on Performance Wheel sets? 

The biggest advantage of a Ratchet Drive System is that ratchet faces engage simultaneously; every time drive goes on. This offers an incredibly strong bind, and as this system has few moving parts, the hub is incredibly durable and overall maintenance is significantly reduced.

Using this system offers a super-responsive 54-tooth ratchet system with an incredibly low 6.6º engagement angle. *Engagement is how much the free hub rotates before power is transferred to the rear wheel. The smaller the engagement, the faster the wheel set will respond. However, too little angle means there's not enough contact surface for loading. You can find the Scribe Five4 RDS for our full Carbon range (disc brake / rim brake), and also high performance alloy wheel sets.  

 

 

  

 

Scribe Development Programme - Sign up to have an input!

At Scribe, we're constantly testing, challenging and obsessing over the smallest of details to make sure we bring the absolute best product possible to market. However, we do this for you, the riders, and we would like to invite you to be a part of our journey.

We have access to some of the best cycling specific product engineers in the world and we would love to know what you think we should work on. We want to hear the the mad, the wonderful and even the wacky ideas from real life riders. If we think there is a feasible product for others in the market; we'll do it! Sign up to get involved. 

Sign me UP!


Share this post


Leave a comment

Note, comments must be approved before they are published

2 comments

  • Hi Gary, thanks for leaving a comment, and for pre-ordering! You won’t be disappointed :-). We’ll be in touch shortly once we have confirmed despatch times with our logistics company.

    • Alan Graham
  • I have pre ordered a set of the alloy wheels so looking forward to getting them

    • Gary Clark